Micro Storm two stage dual ramp progressive nitrous oxide controller

$299.95 $249.95

MICRO STORM
2-STAGE, DUAL RAMP
PROGRESSIVE NITROUS CONTROLLER

$50 off

ONLY 10 units available at this price

Part #: MS-001

PRODUCT DESCRIPTION:

The Micro Storm MS-001 progressive nitrous controller provides independent progressive control for two stages of nitrous oxide. The MS-001 can store up to five different setups.  Each stage has independent control parameters (optional dual ramp feature can be turned ON by user) and are controlled by a single activation input. A Clutch/Trans Brake input is provided for launch control. When the Clutch/Trans Brake input is active (+12 volt applied) the nitrous activation is ignored until the Clutch/Trans Brake input is released. This eliminates the need for additional relays when staging at wide open throttle. The ACTIVATION input can be configured for +12 volt ACTIVATION or TPS (Throttle Position Sensor) ACTIVATION. When a TPS is used the closed throttle voltage and WOT (wide open throttle) are user programmable with either manual adjustment or using Live sensor readings. The TPS input works with either a rising or falling signal, the only requirement is that the signal must span a minimum of 2.5 volts. If the entered values for closed and WOT throttle voltages are less than a 2.5 volt span an error code will be displayed until corrected and the unit will be disabled. There is an integrated RPM window switch function that can accept a wide range of tachometer signal input frequencies (0.5, 1, 1.5, 2, 2.5, 3, 4, and 5 pulses per revolution). The RPM window switch feature is disabled if NO tachometer input signal is present.


Features:

  • Billet aluminum black anodized enclosure with three push buttons for easy programming
  • Compact size (2-7/8" tall x 1-3/4" wide x 3/4" deep)
  • Easy to read digital display
  • Controls 2 stages of wet and/or dry nitrous
  • Each stage can have its own solenoid frequency setting of between 10-40 Hz (cycles per second)
  • Dual ramp mode for each stage for more precise control
  • TPS and tachometer input for easy wiring and safety
  • Shift light or timer output
    • Timer output can be used to activate ignition retard
  • Saves up to 5 different user setups

Link to product instructions.

Micro Storm Nitrous Controller Kit includes:

  • MS-001 nitrous controller
  • mating wiring harness
  • installation hardware kit
  • instructions
  • quick reference card

Link to product videos on YouTube:

https://www.youtube.com/watch?v=_NNaTSSHjz8

https://www.youtube.com/watch?v=2xkIytyTAtE

Warranty:

  • Controller shall be free from defects in parts and workmanship under normal use for 180 days from the date of purchase (see instructions for full details).
  • During warranty, unit can be returned for repair or replacement (to be determined by seller)
  • Buyer responsible for return shipping

Reviews